I.dekk_logo@3x

IMPORTANT FACTORS FOR A SUCCESSFUL INSTALL

Do not install deck boards end-to-end on the main area of your deck.

• When installing a deck that requires lengths greater than a single board (i.e., over 20’), use our Feature Strip as a divider rather than butting boards end-to-end.

The amount of open air space under the deck will determine which boards need to be used. Open air space is defined as: the distance from the grade to the TOP of the joists.

• 24” or more of open air space: Either Tongue & Groove or Traditional boards can be used.

• Less than 24” of open air space: Only Traditional boards can be used with at least 3/16” space between boards. DO NOT use Tongue & Groove boards.

When using the Tongue & Groove boards, leave at least two sides of the under-deck space open for cross ventilation. Two sides of the deck must be open or lattice only.

• Solid cladding or skirting can be used with decks built with Traditional boards that have at least 3/16” space between them.

All face fasteners must be located a minimum of .” from the end of the boards.

Are you planning to tackle your deck project on your own? Read through our DIY Checklist.

Failure to follow these instructions may void the I.Dekk warranty.

I.Dekk Installation

I.Dekk Advanced Installation

CAD details

Download Green Bay Decking’s high-quality cad drawings, specifications and related documents for your next project.